Sticker Robot - cheap, full color, custom, outdoor vinyl stickers

STICKER FACE POSTCARDS
A sticker face postcard is the same as a regular postcard, except for the fact that the front of the postcard is actually a sticker. With our heavy 110 lb backing material, the sticker weight is slightly lighter than a regular postcard and can be sent through the mail with a .22¢ stamp. Additionally, we can add kiss cuts to the sticker front so that individual stickers can be removed from the main sticker.

COLOR
All images must be in CMYK color mode. Grayscale images can be used as well. RGB images are not acceptable — if you normally design for web or multimedia, keep in mind that printed output uses a different color mode and corresponds to percentages of Cyan, Magenta, Yellow and Black inks rather than Red Green and Blue monitor light. For this reason, it is strongly encouraged that the printed design is created in CMYK, rather than created in RGB and then converted to CMYK after the design is set. The monitor CMYK values are still only emulated compared to the actual printed output, but it gives a much better idea as to color relationships.

SIZES AND COST
We can print stickers and sticker faced postcards in any size up to 20" x 27", but here are some standard postcard sizes.
• 3.5" x 5.5" — small-sized postcards — $405/ 1000 (with B/W back print)
• 4" x 6" — standard-sized postcard — $495/ 1000 (with B/W back print)
• 6" x 8" — deluxe sized postcard — $975 /1000 (with B/W back print)

BLEED
For postcards, as with all other sticker art, a 1/8 inch bleed is necessary around all edges.

SAFETY AREA/TRIM
Please keep all type a minimum of 1/8 inch away from the edges for all postcards to ensure no type is trimmed off when the cards are cut. Any type closer than 1/8 inch to any edge is considered a trim violation and a $25 setup fee will be required to revise your work and run your file. Please note this affects borders as well.