Sticker Artwork Setup
Sticker Hole Punch
Adding a hole punch to your sticker is primarily used to turn a regular sticker into a sticker face clothing hang tag.
Set up is simple... just make sure the hold punch is at least 1/4" away from the edge of where your sticker will be trimmed (and also 1/4" from any kiss cuts).
Add a 1-2 pixel, 1/8" circle stroke or path on a separate layer from your artwork. This will indicate wherever you want us to punch through. Label the layer clearly and we'll do the rest.
If you want to get tricky, you can add a kiss cut, a die cut and a hole punch, like the examples below. That way, you can peel a regular sticker separately from the hang tag. Pretty sweet, right?